BCJDS - SPRAY BELT DRESSING
- MSDS: BCJDS
- Manufacturer: DAYTON ELECTRIC MFG CO
- Product Name: SPRAY BELT DRESSING
- National Stock Number: 8030-00N002575
Product Identification
Product ID:SPRAY BELT DRESSING
MSDS Date:01/01/1985
FSC:8030
NIIN:00N002575
MSDS Number: BCJDS
Responsible Party
Emergency Phone: 312-647-8900
Cage: 16327
Contractor
Telephone: 800-323-0620
Cage: 16327
Ingredients
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: <5%
OSHA PEL 100 PPM
ISOBUTANE (PROPELLANT)
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: 10%
ACGIH TLV: 1000 PPM (MFR)
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 10 - 23%
OSHA PEL 1000 PPM
ACGIH TLV: ASPHYXIANT; 9192
METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 50 - 70%
OSHA PEL 350 PPM/450 STEL
ACGIH TLV: 350 PPM/450STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:LIGHT-HEADEDNESS,GIDDINESS,SHORTNESS OF BREATH
& POSSIBLE NAUSEA
First Aid
First Aid:REMOVE TO FRESH AIR-CALL PHYSICIAN. EYE: FLUSH THOROUGHLY W/
WATER-CALL DOCTOR
Fire Fighting
Flash Point:<20F,-7C; TOC
Lower Limits:1
Extinguishing Media:CO*2,DRY CHEM,FOAM,WATER MAY BE INEFFECTIVE-USE TO
COOL CANS
Fire Fighting Procedures:WEAR PRESSURE DEMAND SCBA & FULL PROTECT
CLOTHING
Unusual Fire/Explosion Hazard:DO NOT SPRAY NEAR OPEN FLAME. KEEP @ ROOM
TEMP.AS EXPOS TO DIRECT SUNLIGHT/OTHER HEAT CAUSE BURSTING
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION,VENTILATE.
AVOID BREATHING VAPORS & REMOVE W/ INERT ABSORBENT.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. KEEP @ ROOM
TEMP EXPOSE TO DIRECT SUNLIGHT OR OTHER HEAT MAY CAUSE BURSTING. DO
NOT PUNCTURE OR INCINERATE
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN GENERAL
VICINITY OF ARC WELDING,OPEN FLAMES OR HOT SURFACES. HEAT AND/OR UV
RADIATION MAY CAUSE FORMATION OF HCL AND/OR PHOSGENE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD RESPIRATOR IF NEEDED TO AVOID
BREATH VAPOR OR MIST
Ventilation:LOCAL-TO KEEP CONC BELOW TLV
Eye Protection:RECOMMENDED
Supplemental Safety and Health
BOILING POINT,EVAPORATION RATE & FLASH POINT ARE FOR THE PROPELLANT.
AEROSOL-CONTENTS UNDER PRESSURE: 52 PSIG.
Chemical Properties
Boiling Pt:B.P. Text:<0F;-18
Vapor Density:<1
Evaporation Rate & Reference:FASTER THAN ETHER
Percent Volatiles by Volume:80
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:DO NOT STORE ABOVE 120F,49C
Hazardous Decomposition Products:CO,CO*2,HYDROGEN CHLORIDE,PHOSGENE
UPON THERMAL DECOMP.
Disposal
Waste Disposal Methods:MFR STATES DO NOT INCINERATE. DISPOSE IAW FED,
STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.